1U Rack Mount Chassis

   2U Rack Mount Chassis

   3U Rack Mount Chassis

   4U Rack Mount Chassis

   5U Rack Mount Chassis


  Product Model
[ ESR-102 ]
[+] Enlarge image

ISO View | Top View | Open View
Front View | Rear View


The ESR-102 is a EIA310-D standard 1U chassis designed as a high-quality entry level rackmount enclosure. It supports most form factor server mainboards in the market with multi-core Intel and AMD processors in mind. The ESR-102 compute server chassis offers a versatile & cost-effective solution which empowers all levels of users to get the most out of a variety of compute needs. Its perfect for everything from being utilized as an HPC compute node to digital content rendering or just being a front end appliance for your customer’s network. The ESR Series Server balances what the End-User and System Vendor needs to deliver the best solution. Our products provide a classy design, highest flexibility, ease of installation and maintenance. Each unit has up to 4x dual row hot-swappable cooling fans with multiple temperature sensors at the hot points. The ESR-102 backplane is designed with a built-in power supply-to-drive isolation power management circuitry that allows control over voltage and current fluctuations to protect the data critical hard disk drives. Thus, making the ESR-102 uniquely suitable for tomorrow's highly demanding system workloads.

Features and Benefits
  • Supports SSI EEB 3.5, CEB 1.1 or AMD Dual Opteron compliant server boards
  • Power MOSFET and pre-charge circuit for surge current protection on hard drive and backplane
  • Horizontal backplane design to allow maximum airflow for system cooling
  • Included SGS approved slide rails
  • 3 years warranty on power supply
  • Other High Quality Components are backed by a lifetime warranty



1.75"(H) x 19"(W) x 27"(D)

Front Access Connector

2 X USB ports, 1 X DB9 port

Front Access switch

Power On/Off, Reset, Alarm Reset

Front Panel Indicators

Power On, HDD Activity, Fan failure, Overheat warning, LANs

Hot swap drive indicators

Power On, HDD Activity, HDD failure

Power Supply

500W EPS12V power supply

Power Supply Options

up to 700W Fixed, Redundant, high efficiency 80+

System Board

Up to 12x13 E-ATX, ATX, EEB 3.5, CEB 1.1 compliant

Drive Bay

Internal slim CD x 1

Hotswap Bay x 2

Data Backplane
Serial ATA PTP
Serial ATA Multilane
Ultra 320 SCA
Serial Attached SCSI
Included Data cable Yes
Included slide rail Yes
System Monitoring

Fan / over heat / power supply fault detection


Intel Validated Pass Xeon 3.73Ghz 1066Mhz

SATA backplane Specification
1. A power MOSFET to provide disk spin-up control 2. A pre-charge circuit for surge current protection when a disk is plugged in to protect the hard-disk drive and the backplane. 3. LED: Blue ON = HDD present; Blue Blinking = Drive activity; Red=Drive failure 4. A 4x2 header for Drive activity and Drive failure LED signal input 5. Single DC input to provide better cable management 6. Option for SATA PTP. SAS, multilane and miniSAS 7. Option support SAS expander

SCSI backplane Specification

Technical Documentation
Technical Borchure


User Manual


All package are for US and Canada only , visit support page for other counties.

© Copyright 2005, TST Corp. All rights reserved